Eeks! Mug

Make the kids a frightfully good cup of hot cocoa.



Products Used

Bisque
  • MB-113 - 12 oz. Mug
Color
  • FN-001 - White
  • SC-6 - Sunkissed
  • SC-15 - Tuxedo
  • SC-24 - Dandelion
  • SC-36 - Irish Luck
  • SC-53 - Purple Haze
  • SC-75 - Orange-A-Peel
  • SP-275 - Speckled Orange-A-Peel
Decorating Accessories
  • AC-211 - Sponge on a Stick - 3/8" Diameter
  • AC-213 - Sponge on a Stick - 1ΒΌ"Diameter
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-604 - #4 Soft Fan
  • ST-100 - Game Board
  • ST-101 - Eeks
MB113_ST101_CupsHalloween
Additional Materials
  • Pencil
  • Scissors
Project Info

Instructions


  1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean Sponge and wipe Bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 Coats of FN-001 White to the outside of the mugs. Brush on 3 Coats of SP-275 Speckled Orange-A-Peel to the inside of the mugs.
  3. Cut the ST-101 Eeks Stamp into 3 sections to make it easier to use. For the ghost mug, using the AC-213 Sponge on a Stick, load the Sponge with SC-15 Tuxedo. Tap the SC-15 Tuxedo onto the ghost stamp. Lay the ghost stamp flat on the cup surface and press. Continue around the cup.
  4. Thin SC-6 Sunkissed and brush onto 1 of the ghosts. Thin SC-75 Orange-A-Peel and brush onto another ghost and thin SC-53 Purple Haze and brush onto another ghost. Use a CB-106 #6 Script Liner to apply the color.
  5. Using the AC-213 Sponge on a Stick load the Sponge with SC-75 Orange-A-Peel. Tap the SC-75 Orange-A-Peel onto the net look of the ST-100 Game Board stamp. Stamp around the ghosts to fill in the background.
  6. Brush the mug handles with 2 Coats of SC-15 Tuxedo.
  7. To stamp the scary cat mug, use an AC-211 Small Sponge on a Stick to tap the moon with SC-24 Dandelion. Brush the tree with SC-36 Irish Luck. Then load an AC-213 Sponge on a stick with SC-15 Tuxedo and tap onto the rest of the stamp. Press the cat stamp on to the mug. Continue around the mug. Tap an AC-213 Sponge on a Stick with SC-75 Orange-A-Peel onto a pattern from the ST-100 Game Board stamp to fill in the background.
  8. Stilt and fire both pieces to shelf cone 06.

custom-css-security