3” Llama Wreath Ornament

• Print
• Email

Details

Last Updated: Thursday, 15 November 2018 15:46

1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
2. On the DSS-0156 Llama Drama screen, locate the llama. Draw an outline around it in permanent marker. Cut it out with excess screen around the edges.
3. Squeeze about two tablespoons of SC-15 Tuxedo onto the plate. Add a pinch of AC-310 Silkscreen Medium. Mix with a palette knife until it becomes the consistency of peanut butter. You may need to add more Silkscreen Medium or glaze.
4. Place the llama’s head in the bottom, center of the ornament. While holding it firmly in place, take a small amount of premixed Silkscreen Medium, and gently rub in circles starting in the center and working outward. Slowly pull up the screen to avoid smearing.
5. Using the pencil, draw a wreath around the llama’s head and a scarf around it's neck.
6. Using the Script Liner and Soft Fan with SC-8 Just Froggy, apply two coats to the wreath. Continue over to the sides and back of the ornament. Allow glaze to dry between coats.
7. Using the Detail Liner with SC-73 Candy Apple Red, apply two coats to the scarf. Allow glaze to dry between coats.
8. Using the Script Liner with SC-45 My Blue Heaven, apply two coats between the llama head and wreath. Allow glaze to dry between coats.
9. Using the Detail Liner with SC-15 Tuxedo, outline wreath and scarf.
10. Use SG-403 Red to make clusters of three berries in the wreath. Using the Detail Liner with SC-15 Tuxedo, make leaves coming out from the berries.
11. Use SG-402 White to make stripes in the scarf.
12. Using the Detail Liner with SC-8 Just Froggy, apply two coats to the rims of the llama’s glasses. Allow glaze to dry between coats.
13. Using the Soft Fan, apply one coat of S-2101 Clear Brushing Glaze or dip into NT-CLR Clear Dipping Glaze.
14. Fire to cone 06.