3” Starfish Ornament

 

IMG 3730 starfish

Products Used

Bisque
  • MB-1172 3" Flat Round Ornament 

Color
  • SC-8 Just Froggy
  • SC-73 Candle Apple Red
  • SG-78 Lime Light
  • SG-302 Snowfall
  • SG-701 Star Dust
  • NT-CLR Clear Dipping Glaze or NT-BR Clear One Brushing Glaze

Decorating Accessories

  • RB-144 #4 Soft Fan
  • RB-106 #6 Script Liner
  • RB-110 #10/0 Detail Liner
  • AC-310 Silkscreen Medium
  • DSS-0157 Under the Sea

Miscellaneous Accessories

  • Palette
  • Palette Knife
  • Permanent Marker
  • Scissors
  • Pencil 

 

Designer: Elizabeth Carey
 
Instructions
  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. On the DSS-0157 Under the Sea screen, locate the starfish. Draw an outline around it in permanent marker. Cut it out with the excess screen around the edges.
  3. Squeeze about two tablespoons of SC-8 Just Froggy onto the plate. Add a pinch of AC-310 Silkscreen Medium. Mix with a palette knife until it becomes the consistency of peanut butter. You may need to add more Silkscreen Medium or glaze.
  4. Place the starfish in the center of the ornament. While holding it firmly in place, take a small amount of premixed Silkscreen Medium, and gently rub in circles starting in the center and working outward. Slowly pull up the screen to avoid smearing. Repeat to the immediate left and right of the center starfish. Work quickly so the screen does not have time to dry.
  5. Using the pencil, draw the bands on the ornament. Refer to image.
  6. Using the Detail Liner with SC-78 Lime Light, apply two coats the starfish. Allow glaze to dry between coats.
  7. Using the Detail Liner with SC-8 Just Froggy, apply two coats to the band behind the starfish. Allow glaze to dry between coats.
  8. Using the Detail Liner with SG-302 Snowfall, apply one coat to the next upper and lower bands. Apply one coat to the band at the top of the ornament.
  9. Using the Scrip Liner with SC-73 Candy Apple Red, apply two coats to the next upper and lower bands. Allow glaze to dry between coats.
  10. Using the Detail Liner with SC-8 Just froggy, make a line between the SG-302 Snowfall and SC-73 Candy Apple Red.
  11. Using the Scrip Liner and Soft Fan, apply two coats to the sides and back of the ornament. Allow glaze to dry between coats.
  12. Using the Script Liner with SG-701 Star Dust, apply one coat to the areas glazed with SC-73 Candy Apple Red.
  13. Using the Soft Fan, apply one coat of S-2101 Clear Brushing Glaze or dip into NT-CLR Clear Dipping Glaze.
  14. Fire to cone 06.

custom-css-security