Bunny Canvas

 

Products Used

Bisque
  • MB-1353 8" X 10" Clay Canvas,
Color
  • FN-001 White, FN-214 Pastel Jade, FN-231 Clearly Jade, SC-009 Jaded, SC-15 Tuxedo, SC-70 Pink-A-Dot, SC-78 Lime Light

Decorating Accessories

  • AC-230 Clay Carbon paper, AC-310 Silkscreen Medium, BT-910 Synthetic Sponge, DSS-0103 Designer Silkscreen Flourishes, DSS-0104 Designer Silkscreen Chevron, CB-110 # 10/0 Liner, CB,404 # 4 Pointed Round, CB-604 # 4 Soft Fan, CB-606 # 6 Soft Fan

Miscellaneous Accessories

  • Scissors, Red Pen or Pencil, 1" pricing stickers, Palette Knife
  • Download: Pattern

 

TMcP Bunny Canvas
Designer: Tim McPherson
 
 

Instructions 

  1. Damp sponge over ware to remove any dust using the BT-910 Synthetic Sponge.
  2. Using the CB-606 # 6 Soft Fan, apply 2 coats of FN-001 White to the top of the canvas.
  3. Cut out the pattern, wet the glaze, and press the cut out pattern into place, pressing to seal the edges so no color can get under it.
  4. Using the CB-604 # 4 Soft Fan, apply 2 coats of FN-214 Pastel Jade to the front, and remove the paper cut out.
  5. Using the AC-230 Clay Carbon, trace on the pattern.
  6. Apply the 1" circles to the bunny on the right.
  7. Using the Cb-404 # 4 Pointed Round, apply 3 coats of SC-78 Lime Light to the bunny on the left and 3 coats of SC-70 Pink-A-Dot to the bunny on the right, keeping off the tails.
  8. Remove the 1" circles.
  9. Using a palette knife, mix the AC-310 Silkscreen Medium with SC-15 Tuxedo to a peanut butter constincy.
  10. Holding the silkscreen in place, shiny side down, apply chevron stripes to the bunny on the left with the DSS-0104 Designer Silkscreen Chevron, and to the circles on the bunny on the right, DSS-0103 Flourishes by rubbing the thickend mixture in a circurlar motion with your finger, pushing the thickend color through the silkscreem. When finished, wash the silkscreens with water.
  11. Using a brush handle or painting them in, add SC-9 Jaded dots to the left bunny, SC070 Pink-A-Dot dots to the center bunny and SC-78 Lime Light dots to the right bunny.
  12. Using the CB-110# 10/0 Liner loaded in SC-15 Tuxedo, outline and detail the design.
  13. Using the CB-604 # 4 Soft Fan, apply 3 coats of FN-231 Clearly Jade to the edges.
  14. Stilt and fire to shelf cone 05/06.