Pumpkin Lovin' Kitty

 

 
 
Products Used

Bisque
  • MB-101 Coupe Salad Plate
Color
  • SC-2 Melon-Choly
  • SC-6 Sunkissed
  • SC-15 Tuxedo
  • SC-45 My Blue Heaven
  • SC-50 Orange Ya Happy
  • SC-74 Hot Tamale
  • SG-401 Black Designer Liner
  • S-2101 Crystal Clear Brushing
Decorating Accessories
  • CB-110 #10/0 Liner
  • CB-404 #4 Pointed Round
  • CB-604 #4 Soft Fan
  • RB-104 #4 Round
  • BT-910 Synthetic Sponge
  • AC-230 Clay Carbon Paper
Pumpkin_Lovin_Kitty
 
 
Additional Materials
 
Project Info
  • Designer: Adena Griffith
  • Skill Level: Basic
  • Time: 2 hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-003 Orange onto the back of the plate. Allow to dry.
  3. With a pencil and AC-230 Clay Carbon Paper, trace on the pattern.
  4. Use SG-401 Black Designer Liner to outline the design. Leave the inside lines of the pumpkin until you are finished glazing.
  5. Using a CB-404 #4 Pointed Round, apply 1 coat of SC-50 Orange-Ya Happy to the pumpkin adding some extra for shading.
  6. Using a RB-104 #4 Liner, apply SC-15 Tuxedo to the inside of the pumpkin’s features.
  7. Using a RB-104 #4 Liner, apply 1thin coat of SC-15 Tuxedo to the cat and add some extra color for shading.
  8. Using a CB-110 #10/0 Liner, apply SC-45 My Blue Heaven for the eyes and SC-2 Melon-Choly for the nose and bits of the ears.
  9. Using a CB-404 #4 Pointed Round, apply 1 coat of SC-41 Brown Cow to the stem of the Pumpkin.
  10. Add the detail lines onto the pumpkin once it is completely dry using the SG-401 Black Designer Liner.
  11. For the background of the piece. Squeeze out a small amount of SC-74 Hot Tamale, SC-50 Orange-Ya-Happy, and SC-6 Sunkissed. Choose which color you would like to start with and tap your sponge into it. Tap off some of the extra and then apply it to the plate. Keep adding color until it is to your liking. Then start to layer the three Stroke and Coats until you have the desired effect.
  12. Allow to completely dry.
  13. Using a CB-604 #4 Soft Fan, apply 2 coats of S-2101 Crystal Clear Brushing Glaze to the top side of the plate. Allow to dry.
  14. Stilt and fire to shelf cone 06/05.

custom-css-security