Cactus Planter Llama

• Print
• Email

Details

Last Updated: Thursday, 06 February 2020 14:27

Instructions

1. Fire Greenware to cone 04.

2. Thin Slightly FN-009 Black, pour to the inside, turn to coat, pour out the excess glaze.

3. From a palette, brush on thinned SG-406 Brown with CB-604 Soft Fan to the body of the llama.

4. Use a slightly damp sponge to remove some of the color to give it a rustic look. Brush strokes from application should not show, and most of the llama should be an off white color, deeper brown in all the detail and shadow areas.

5. From a palette, use SG-401 Black to float a shadow color around the detail of the llama. Brush thinned Black on the fringe and tassels, remove the excess with a damp sponge or stiff brush.

6. Trace on the cactus pattern to the blanket.

7. Brush the cactus with 2-3 coats of SC-8 Just Froggy with CB-106 Script Liner.

8. Thin SG-404 Blue like water, brush stroke the background of the blanket in a brush stoke fashion, stoke in thinned SG-401 Black very thin to shadow the blanket background.

9. Use SG-401 Black from the bottle with the tip, to pattern the cactus and the blanket with black short lines. Outline the cactus, use SG-401 Black using the CB-110 Liner.

10. Brush the feet with 2 coats of FN-009 Black use CB-604 Soft Fan.

11. Eyes, are with SG-406 Brown, and SG-401 Black use CB-110 Liner.

12. Brush on two coats of S-2101 Clear with CB-604 Soft Fan.

13. Fire to cone 05/06