Daisies on Parade

 

 
 
Products Used

Bisque
  • MB-1353 8"x10" Clay Canvas
Color
  • SC-9 Jaded
  • SC-11 Blue Yonder
  • SC-16 Cotton Tail
  • SC-29 Blue Grass
  • SC-91 Seabreeze
  • SC-94 Curry Around
  • FN-001 White
  • SG-401 Black Designer Liner
  • SG-501 Sculpture Medium
  • S-2101 Crystal Clear Brushing
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponges
Canvasing_for_Flowers
 
 
Additional Materials
  • Pencil
  • Hamper Netting
  • Daisies Stencil (Delta Creative 970720710) JoAnn's Fabric Store
  • Stencil Adhesive
  • 2" Foam Rollers w/ tray - 3 sets
 
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: 1½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the canvas.
  3. Pour a small amount of SC-11 Blue Yonder SC-91 Seabreeze, and SC-9 Jaded into the trays that come with the mini roller.
  4. Apply 3 coats of SC-91 Seabreeze to the front and sides of the canvas with the 2" foam roller; apply SC-9 Jaded to the middle of the canvas in an uneven, patchy manner; SC-11 Blue Yonder is applied in the same uneven, patchy manner to the bottom section.  Use a clean roller to add SC-16 Cotton Tail in some of the sky areas. Allow to dry.
  5. Place some hamper netting over the lower section, and roll over with SC-29 Blue Grass. Remove the netting.
  6. Pencil in the stems and dot for flower placement.
  7. Glaze must be dry for the stencil to work.  Spray the back of the flower stencil with adhesive, place in position and use a CB-106 #6 Script Liner to apply the SG-501 Sculpting Medium, wait a few seconds then remove the stencil, repeat for all the flowers.
  8. Using a CB-110 #10/0 Liner, apply 1 coat of SC-29 Blue Grass to the stem and outline the center with this color, fill in the remaining center with SC-94 Curry Around
  9. Detail the stem with a line of SG-401 Black Designer Liner, and dot the centers.
  10. Apply S-2101 Crystal Clear Brushing over the stems. Allow to dry.
  11. Stilt and fire to shelf cone 05/06.

custom-css-security