Abstract Owl
- Details
- Last Updated: Wednesday, 23 July 2014 19:37
Bisque
- MB-1293 Rectangle Plate
- CMM-19 Banana Boat
- CMM-27 Kiwi
- CMM-29 Grasshopper
- FN-009 Black
- FN-014 Antique White
- SG-401 Designer Liner
- S-2101 Crystal Clear Brushing
- CB-110 #10/0 Liner
- CB-604 #4 Soft Fan
- AC-213 Sponge on a Stick
- AC-230 Clay Carbon Paper
- ST-113 Circulate Stamp
- BT-910 Synthetic Sponge
- Pencil
- Felt Ribbon
- Scissors
- Blue Masking Tape
- Download Project Pattern: Green Owl
- Designer: William Pulse
- Skill Level: Basic
- Time: 1½ hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-604 #4 Soft Fan, apply 3 coats of FN-014 Antique White to the top of the plate. Allow to dry.
- Cut out the owl pattern. You will need both the positive and the negative parts of the pattern.
- Apply the negative pattern to the plate using a CB-604 #4 Soft Fan with water. Press the pattern a sheet of paper towel to help adhere the pattern and absorb any excess water from under the pattern.
- Eyeballing the chest and head area. Using a CB-604 #4 Soft Fan, apply CMM-27 Kiwi to the head and chest area of the owl. Apply CMM-29 Grasshopper to the wing, feet and around the head area. Apply 2 coats. Allow to dry.
- With a pencil and AC-230 Clay Carbon Paper trace the main parts of the owl using the positive pattern. Note: no need to trace all the small circles on the chest.
- Using the SG-401 Designer Liner, outline and detail the owl. Do not try to fill in the larger solid areas with the bottle. Place a couple drops of SG-401 Designer Liner onto a piece of felt ribbon. Using the Metal Tip, dip the round end into the color then onto the chest area to create the circles on the chest. Place some SG-401 Designer Liner on a tile and using a CB-110 #10/0 Liner fill in the solid areas with 1 coat.
- Position the positive pattern back onto the plate.
- Using the AC-213 Sponge on a Stick load the sponge with CMM-19 Banana Boat. Tap the CMM-19 Banana Boat onto the ST-113 Circulate Stamp then holding the pattern in place press the stamp gently onto the background of the piece. Allow to dry.
- Using a CB-604 #4 Soft Fan, apply 1 coat of S-2101 Crystal Clear brushing to the owl area only.
- Using a CB-604 #4 Soft Fan, apply 2 –3 coats of FN-009 Black to the back of the plate. Allow to dry.
- Stilt and fire to shelf cone 05/06.