Loving Tray
- Details
- Last Updated: Thursday, 29 May 2014 17:26
Bisque
- MB-1292 Rectangle Dinner Plate
- SC-1 Pink -A-Boo
- SC-74 Hot Tamale
- SC-95 Pinkie Swear
- FN-001 White
- FN-004 Red
- CB-106 #6 Script Liner
- CB-110 #10/0 Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponge
- Pencil
- 1/2" Masking Tape
- Scissors
- Heart Paper Punches
- 20# Copy Paper
- Download Project Pattern
- Designer: Bob Moreni
- Skill Level: Basic
- Time: 2 hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Apply ½” Masking to the outer edge of the center of the plate.
- Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the center area of the plate. Allow to dry.
- Cut out the word love and the heart patterns. With water attach the word love. Blot with a paper towel to absorb any excess water.
- Place the hearts to the center of the plate and trace around with a pencil, also trace around the word love.
- Using a CB-106 #6 Script Liner, apply 3 coats of SC-74 Hot Tamale to the hearts.
- Remove the paper word love.
- With a pencil, sketch a 1/8” border to the inside of the word love.
- Using a CB-110 #10/0 Liner, apply 2-3 coats of SC-95 Pinkie Swear to the border.
- Apply ½” Masking Tape to the edge of the center area
- Using a CB-604 #4 Soft Fan, apply 3 coats of SC-1 Pink-A-Boo to the outer edge of the plate. Allow to dry.
- With the heart paper punches punch out 4 larger hearts for the corners of the plate and 12 smaller hearts for in between. Apply the negative punch-outs to the edge of the plate with water. Blot with a paper towel to absorb any excess water.
- Using a CB-106 #6 Script Liner, apply 3 coats of SC-74 Hot Tamale to the hearts.
- Remove the paper cut out hearts.
- Using a CB-604 #4 Soft Fan, apply 3 coats of FN-004 Red to the back of the plate. Allow to dry.
- Stilt and fire to shelf cone 06/05.