Simple Raccoon Mug

• Print
• Email

Details

Last Updated: Thursday, 21 December 2017 16:22

Designer: Chelsea Proctor

 

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Using the Script Liner, apply 3 coats of SC-16 Cotton Tail to the belly, tips of the ears, nose, eye brows and the first stripe on the tail and then every third stripe after that.
3. Using the Script Liner, apply 2 coats of SC-15 Tuxedo to the cheek area, inside the ears, and the third stripe on the tail and then every third stripe after that.
4. Using the same brush, apply 3 coats of SC-35 Gray Hare on the rest of the body and the second stripe on the tail and every third stripe after that.
5. With the Soft Fan, apply 3 coats of SC-75 Orange-A-Peel to the background of the mug. Only on the outside.
6. Also with the Soft Fan, apply 3 coats of SC-11 Blue Yonder to the inside of the mug.
7. Wipe off the rim of the mug with a damp sponge until there is no glaze left on the rim.
8. Using the Script Liner, apply 2 coats of S-2101 Crystal Clear Brushing Glaze to the rim of the mug.
9. Use the Detail Liner to apply 3 coats of SC-16 Cotton Tail to the eyes.
10. Then apply 3 coats of SC-26 Green Thumb to the 2/3 of the eye with a detail liner brush. Leaving white at the tops of the eyes.
11. To finish the eyes, use the Detail Liner to apply 2 coats of SC-15 Tuxedo to the eye. Make an oval shape at the bottom of the blue part of the eye with Tuxedo.
12. Dip the Detail Liner in water and add some SC-15 Tuxedo. Make a thin line that outlines the squirrel and his details.
13. Stilt and fire to shelf cone 04/05.