Wavy Cat Tile

• Print
• Email

Details

Last Updated: Monday, 13 November 2017 17:15

Designer: Marcia Roullard

 

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Using CB-604 Soft Fan, apply 2 coats of FN-009 Black to the tile. 
3. Cut out the cat pattern, wet the tile, and stick the paper to the wet surface. Blot with a paper towel or sponge to adhere paper completely. 
4. Usig CB-604 Soft Fan, apply 2 coats of SC-16 Cotton Tail to the tile. 
5. When dry, lay the SL-437 Groovy stencil over the tile in the pattern shown. With the foam roller, roll SC-74 Hot Tamale over the stencil with minimum pressure so not to bleed the color under the stencil. Continue to change directions of the wavy lines of the stencil.
6. Remove the paper.
7. Glaze must be dry before proceeding.
8. With the various Designer Liner colors, decorate the cat as shown.
9. For the pink nose and ears, mix SG-402 White with SG-403 Red, and apply with CB-110 Liner.
10. Using CB-110 Liner, apply SG-410 Blue to the iris.
11. Brush one coat of S-2101 Clear with CB-604 Soft Fan.
12. Fire to cone 05/06.