Snake Tile

Details
Last Updated: Tuesday, 21 February 2017 15:48

 

Products Used

Bisque
  • 6" tile
Color
  • UG-46 Bright Yellow,
  • UG-50 Jet Black
  • UG-51 China White
  • UG-97 Bright Blue
  • UG-204 Orange
  • UG-207 Flame Red
  • UG-219 Marine Blue
  • S-2101 Clear

Decorating Accessories

  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan

Miscellaneous Accessories

  • Plastic card (old loyalty card or hotel room key)
  • Pattern: Download

 

Snake Tile
Designer: Marcia Roullard
 
 

Instructions

 

1. Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.

2. Cut out the pattern of the snake. Trace around the snake onto a tile.

3. Apply one coat of UG-51 China White over the snake pattern, going past the edges.

4. Wet the snake area with water, then place the paper snake on the wet surface. Press down gently with a paper towel to remove excess water and to ensure the edges are sealed.

5. With the plastic card pick up UG-51 China White then add some UG-46 Bright Yellow and UG-219 Marine Blue. Drag the color down the tile and over the paper snake, holding the card almost flat to apply the color.. Repeat for a second application.

6. Remove the paper snake.

7. Use the Script Liner to apply two coats of UG-51 Bright Blue over the snake. Use the Liner to apply UG-204 Orange for the stripes.

8.  Use the Soft Fan to apply two coats of S-2101 Clear Brushing Glaze.

9.  Fire to cone 04.

.

custom-css-security