Zebra Tile

• Print
• Email

Details

Last Updated: Tuesday, 09 May 2017 17:33

Designer: Marcia Roullard

 

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Cut out the pattern for the zebra. Trace around the pattern onto the tile.
3. Apply two coats SC-16 Cotton Tail over the Zebra area. 
4. Wet the area of the zebra on the tile. Place the paper pattern onto the tile and press to adhere to the tile. Gently press with a paper towel to remove excess water and ensure the edges are sealed.
5. Brush the tile going over the edges of the paper with two coats of CG-968 Peppermint Twist.
6. Remove the paper after the gloss leaves the glaze. Let dry.
7. Pencil in the zebra stripes.
8. Use the Liner to apply two coats of SC-15 Tuxedo to the stripes. Create an eye and outline the zebra with Tuxedo.
9. Fire to cone 06.