Black Iris

Paper painting on bisque with Stroke & Coat, Elements and Jungle Gems.



Products Used

Bisque
  • MB-1115 - Casualware Salad Plate
Color
  • CG-798NT - Black Iris
  • EL-110 - Mudslide
  • SC-15 - Tuxedo
Decorating Accessories
  • AC-230 - Clay Carbon Paper
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-110 - #10/0 Liner
  • CB-604 - #4 Soft Fan
MB1166_leaf_plate
Additional Materials
  • Pencil
  • Scissors
  • Tweezer
  • Pin
  • Download Project Pattern: Leaves
Project Info

Instructions


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. With a pencil and AC-230 Cay Carbon Paper, trace on the pattern.
  3. Using a CB-106 #6 Script Liner and a CB-110 #10/0 Liner, apply 2 coats of SC-15 Tuxedo to the leaves and stems.
  4. Cut out the other paper pattern.
  5. Using a CB-106 #6 Script Liner, apply SC-15 Tuxedo to the back of the paper pattern. Press lightly to set in place on the leaf, and then wait a minute before pressing firmly. This will remove air bubbles and allow the glaze to adhere to the plate from the paper.
  6. Using a damp sponge, wipe any color the has squirted out, starting from the center of the flower out. There should be no color on the bisque.
  7. Using a CB-604 #4 Soft Fan, apply 2-3 coats of El-110 Mudslide to the top of the plate.
  8. When the last coat of El-110 Mudslide has lost its shine, remove the paper leaves and stems with a pin and tweezers. Allow to dry.
  9. Using a CB-604 #4 Soft Fan, apply 2-3 coats of El-110 Mud Slide to the back of the plate.
  10. Using a CB-106 #6 Script Liner and a CB-110 #10/0 Liner, apply 1 coat of CG-798 Black Iris to the leaves and stems. Note: Do not place too many crystals on the stems. Allow to dry.
  11. Stilt and fire to shelf cone 06.

custom-css-security