Power Flower
- Details
- Last Updated: Tuesday, 25 November 2014 21:07
Bisque
- MB-102 - Coupe Dinner Plate 9¾"
- MM-105 - Gold Metallic
- MM-202 - Green Patina
- SS-138 - Flat Black
- AB-834 - ¾" Acrylic Base Coat
- AC-213 - Sponge on a Stick - 1¼"Diameter
- BT-910 - Synthetic Sponges
- Foam Flower Stamp
- Large Spiral Foam Stamp
- Flat Black Spray Paint
- Paper Towel
- Foam Plates
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Spray paint the plate with a Flat Black Spray Paint. Allow to dry.
- Shake and stir MM-105 Gold Metallic well. Place some an a foam plate.
- Using a CB-834 ¾" Base Coat brush, apply 1 coat of MM-105 Gold Metallic to the top of the plate. Allow to dry. Apply a second coat of Gold Metallic paint.
- Stamp the center area of the plate with the large spiral stamp covered with SS-138 Flat Black. To avoice overloading the stamp with paint, use a Sponge on a Stick to pat the stamp with the acrylic first. Then apply the stamp to the plate.
- Spray the edge area of the plate with the black spray paint. This will put a light mist of black over the center area of gold.
- Use small flower stamps to stamp on MM-105 Gold Metallic on the border of the plate.
- Protect the center of the plate with paper towel, so as to not get the green patina spray in the center. Spray the gold flowers with MM-202 Green Patina before they dry.