Stenciling with Sculpting Medium
- Details
- Last Updated: Tuesday, 23 April 2019 17:46
Bisque
- DT-661 6" Bisque Tile
- SG-501 Sculpting Medium
- EL-134 Mirror Blue
- EL-136 Lapis Lagoon
- CG-976 Teal Drops
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponges
- Pencil
- Fleur De Lis Stencil
- Stencil Adhesive
- Rubber Squeegee
- Designer: Marcia Roullard
- Skill Level: Basic
- Time: 1½ hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Spray the back of the stencil with stencil adhesive.
- Place on the tile.
- Use a Rubber Squeegee to apply 1 coat of SG-501 Sculpture Medium, remove the stencil. Allow to dry.
- Using a CB-604 #4 Soft Fan, apply 1 coat of CG-976 Teal Drops to the background, not important to be exact.
- Using a CB-604 #4 Soft Fan, apply 2 coats of EL-136 Lapis Lagoon to the entire tile.
- Using a CB-604 #4 Soft Fan, apply 1 coat of EL-134 Mirror Blue, to the tile.
- When it begins to dry, with a wet brush scrub back some of the Mirror Blue from the raised design. Allow to dry.
- Stilt and fire to shelf cone 06/05.