Pop Art

• Print
• Email

Details

Last Updated: Monday, 10 April 2017 17:51

 

Designer: Teddy Wright

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Using CB-604 #4 Soft Fan, apply two coats of FN-001 White to the front of the MB-1352 Clay Canvas bisque. Allow glaze to lose its shine between coats. Allow to dry.
3. Using the AC-230 Clay Carbon Paper, trace the pattern onto the bisque with a pencil.
4. Using the Water-based markers, outline the traced image and lightly shade areas to be filled in.
5. With a palette knife, mix SC-74 Hot Tamale with AC-310 Silkscreen Medium to the consistency of peanut butter. 
6. To screen onto the bisque, rub the thickened SC-74 Hot Tamale over the screen, grain side up. If the image is screened on areas you do not want, wipe with a damp sponge.
   • Tip: Refer to the Silkscreen Instructions for additional information.
7. Clean the screen by rinsing or laying in water. Lay screen flat to dry. Do not let glaze dry on screen.
8. Using CB-106 #6 Script Liner, apply two coats of SC-24 Dandelion to the hair. Allow glaze to dry completely between coats.
9. Using CB-106 #6 Script Liner and CB-110 #10/0 Detail Liner, apply two coats of SC-15 Tuxedo to all of the remaining outlined areas as well as the facial details. Allow glaze to dry completely between coats.
10. Using CB-106 #6 Script Liner, apply two coats of SC-11 Blue Yonder to the head band. Allow glaze to dry completely between coats.
11. Using CB-604 #4 Soft Fan, apply two coats of SC-15 Tuxedo to the edges of the bisque. Allow glaze to dry completely between coats.
12. Stilt and fire to shelf cone 06/05.