Stamped Flower Vase - Red

Details
Last Updated: Monday, 13 November 2017 17:31

 

Products Used

Bisque
  • MB-1461 Clay Clipboard
Color
  • FN-001 White
  • SC-6 Sunkissed
  • SC-11 Blue Yonder
  • SC-12 Moody Blue
  • SC-13 Grapel
  • SC-27 Sour Apple
  • SC-42 Butter Me Up
  • SC-45 My Blue Heaven
  • SC-74 Hot Tamale
  • SC-75 Orange-A-Peel
  • SC-97 Cant-elope
  • SG-401 Black Designer Liner

Decorating Accessories

  • SL-456 Camo Stencil
  • SL-448 Doily Stencil
  • CB-106 #6 Script Liner
  • CB-604 #4 Soft Fan
  • CB-404 # Pointed Round

Miscellaneous Accessories

  • MC-202 1/2" Masking Tape
  • Sponge
  • Sponge-on-a-Stick
  • Pattern: Download

 

Stamped Vase Red
Designer: Marcia Roullard
 
 

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.

2. Using the AC-230 Clay Carbon Paper trace on the pattern. Only one side of the AC-230 Clay Carbon paper transfers so test before tracing the entire design. Lay the pattern on top of the AC-230 Clay Carbon paper and place both sheets on the bisque. Use a pen or pencil to trace the pattern. Pen presses a little firmer.

3. Using the MC-002 1/2" Masking Tape, tape the inside of the vase at the edge and the bottom

4. Place the SL-456 Camo Stencil over the canvas. Lightly dab SC-74 Hot Tamale over the stencil (heavy application will bleed) going around the vase and flowers.

5. Remove the tape.

6. Place a piece of the 1/2" Masking Tape to the outside edges and bottom of the vase. Be sure the entire vase area is exposed.

7. Use the CB-106 Script Liner pat color onto the vase in thirds. The goal is to graduate the color from left to right and darker to lighter on the vase. Begin with SC-12 Moody Blue on the left third of the vase and with a few pats past center. Pat SC-11 Blue Yonder to the next third and SC-45 My Blue Heaven over the right edge of the SC-11 Blue Yonder extending to the right side of the vase. Overlap colors randomly to keep the gradation between colors soft.

8. Remove the tape.

9. Use the Script Liner to apply two coats of the following colors in a random manner where the pattern places the flowers. Try to separate the color and not over lap. Pat on two coats of: SC-06 Sunkissed, SC-97 Cant-elope, SC-11 Blue Yonder, SC-13 Grapel, SC-75 Orange A Peel, SC-73 Candy Apple Red.

10. When the flowers have dried, use SG-401 Black Designer Liner to create an outline of petals and centers and leaves. This will give the flowers their form.

12. Dip into NT-CLR Clear Dipping Glaze.

13. Fire to cone 05/06.

This can be used as a clip board or a tile to hang on the wall, use a two part epoxy to attach the clip or a hanging device onto the back to hang.

custom-css-security