Element Cactus Canvas

Details
Last Updated: Tuesday, 23 April 2019 18:00

 

Products Used

Bisque
  • MB-1352 6 x 6 Clay Canvas
Color
  • FN-008 Brown
  • EL-128 Wheat
  • EL-130 Sea Green
  • EL-131 Turtle Shell
  • SC-27 Sour Apple

Decorating Accessories

  • AC-302 Wax Resist
  • CB-106 Script Liner
  • CB-110 Liner
  • CB-604 Soft Fan
  • AC-320 Clay Carbon Paper

Miscellaneous Accessories 

 

element cactusDesigner: Marcia Roullard
 
 

Instructions

  1. Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove dust.
  2. Using the CB-604 Soft Fan Brush, apply three coats of FN-008 Brown to the canvas, front and sides. 
  3. Using the AC-320 Clay Carbon Paper trace on the pattern. Clay carbon paper will not transfer if the glaze is wet or damp.
  4. Use the CB-110 Liner just the AC-302 Wax Resist to outline the cactus and the lines in the body of the cactus. Basically, any line drawn from the pattern is outlined with the Wax Resist.
  5. Using the CB-106 Script Liner apply 2 1/2 coats of EL-130 Sea Green to the cactus. The 1/2 coat is one coat down the center of the cactus.
  6. Using the CB-106 Script Liner apply two coats of EL-131 Turtle Shell to the small pieces of the cactus.  
  7. When the shine is off the glaze, use the same brush and apply 1-2 coats of SC-27 Sour Apple over the EL-131 Turtle Shell. Just on the small sections of the cactus.
  8. Using the CB-106 Script Liner apply 2 coats of EL-128 Wheat to the background and sides of the canvas.
  9. Stilt and fire to cone 06.

custom-css-security