BOO! Cat

Details
Last Updated: Thursday, 31 August 2017 17:56

 

Products Used

Bisque
  • MB-1406 Stretch Cat Container
Color
  • FN-003 Orange
  • C-75 Orange-A-Peel
  • SC-15 Tuxedo
  • SC-97 Cant-elope
  • SG-408 Orange
  • SG-403 Red
  • SC-27 Sour Apple
  • NT-CLR Clear Dipping or S-2101 Clear Brushing Glaze

Decorating Accessories

  • CB-110 Liner
  • CB-106 Script Liner
  • CB-604 Soft Fan

Miscellaneous Accessories

 

boo cat
Designer: Marcia Roullard
 
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Trace or draw the pattern.
  3. Slightly thin FN-003 Orange and pour inside, roll to coat, then pour out the excess.
  4. Remove glaze that drips to the outside of the cat with a damp sponge.
  5. Use the Script Liner to apply three coats of SC-75 Orange-A-Peel to the banners and inside the ears.
  6. Use the Liner to apply two coats of SC-97 Cant-elope to the banner string wrapping it around the tail. Brush the remainder of the cat with two coats of SC-15 Tuxedo, careful around the eyes, leave unglazed.
  7. Use the Liner to outline the banner from the string, to fill in the letters BOO and dot the banner with SC-15 Tuxedo. Use the Script Liner to shade the inside of the ears with SC-15 Tuxedo.
  8. When the Tuxedo is dry, use SG-408 Orange to draw in the whiskers and SG-403 Red to outline the mouth and nose. Use the Liner to apply two coats of SC-27 Sour Apple to the eyes. Fill in the pupil and outline the eyes with SC-15 Tuxedo.
  9. Dip into NT-CLR Clear Dipping Glaze or use the Soft Fan to apply one coat of S-2101 Clear Brusing Glaze.
  10. Fire to cone 06.

custom-css-security