Crackle Vintage Snowman

 

Products Used

Bisque
  • MB-1473 Vintage Snowman
Color
  • SC-2 Melon-Choly
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-22 Carrot Top
  • SC-29 Blue Grass
  • SC-45 My Blue Heaven
  • SC-73 Candy Apple Red
  • SC-76 Cara-Bein Blue
  • SC-81 Cinnamon Stix
  • CC-101 Transparent Crackle

Decorating Accessories

  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • CB-106 #6 Script Liner

Miscellaneous Accessories

  • Star Paper Punch
  • BT-910 Synthetic Sponge

 

crackle vintage snowman
Designer: Marcia Roullard
 
 

Instructions

 

 

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.

2. Use the CB-106 #6 Script Liner to apply three coats of SC-73 Candy Apple Red to the jacket. Use the same brush to apply one coat of SC-81 Cinnamon Stix to the jacket and allow the color to fade into Candy Apple Red.  

3. Use the Script Liner to apply three coats of SC-45 My Blue Heaven to the scarf. Use the same brush to add shading on the edges with SC-29 Blue Grass.

4. Use the Script Liner to apply the following: two coats of SC-45 My Blue Heaven to the buttons; three coats of SC-29 Blue Grass to the mittens; two coats of SC-73 Candy Apple Red to the hat band; two coats of SC-15 Tuxedo to the hat and two coats of SC-22 Carrot Top to the nose.

5. Use the sponge to lightly apply one coat of SC-2 Melon-Choly to the cheeks.

6. Use the CB-110 #10/0 Liner with SC-16 Cotton Tail to highlight the hat. Use the same brush to apply two thinned coats of SC-76 Cara-Bein to the eyes; apply one coat of SC-15 Tuxedo to the pupils and to outline the eyes and mouth and fill in the eyebrows.

7. Use the star paper punch to punch out shapes. You will be using the negative part of the punch. Wet each piece of paper and gently press onto the scarf and jacket. Gently press the shapes down with a paper towel to remove excess water and ensure the edges are sealed. Use the CB-604 #4 Soft Fan to apply two coats of SC-16 Cotton Tail over the star shapes. Remove the paper.

8. Use a brush or cotton swab with water to remove any color that may have gotten on to the body of the snowman.

9. Use the Soft Fan to apply two or three coats of CC-101 Transparent Crackle over the head and body of the snowman. Heavier application gives larger cracks; thinner application gives smaller cracks.

10. Fire to cone 05/06.

11. Thin a dark acrylic paint and use the Soft Fan to brush over the head and body of the snowman (antiquing). Use a soft cloth or towel to wipe color off of the piece. Color will remain in the cracks. Note: You may antiqiue the snowman right after firing or wait a day to allow more cracks to appear.

custom-css-security