3” No Prob Llama Ornament

 

 noprobllama

Products Used

Bisque
  • MB-1172 3” Flat Round Ornament 

Color
  • SC-78 Lime Light
  • SC-81 Cinnamon Stix
  • SG-302 Snowfall
  • SG-403 Red
  • SG-405 Green
  • SG-702 Celebration 
  • NT-CLR Clear Dipping Glaze or NT-BR Clear One Brushing Glaze

Decorating Accessories

  • RB-144 #4 Soft Fan
  • RB-106 #6 Script Liner
  • AC-310 Silkscreen Medium
  • DSS-0156 Llama Drama

Miscellaneous Accessories

  • Palette
  • Palette Knife
  • Permanent Marker
  • Scissors
  • Pencil 

 

Designer: Elizabeth Carey
 
Instructions
  1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
  2. Use the pencil to make two horizontal lines across the ornament. They should be 1/4” from the top and bottom.
  3. Using the Scrip Liner with SC-78 Lime Light, apply two coats to the front, center section of the ornament. Allow glaze to dry between coats.
  4. On the DSS-0156 Llama Drama screen, locate the “NO PROB LLAMA” screen. Draw an outline around it in permanent marker. Cut it out with excess screen around the edges.
  5. Squeeze about two tablespoons of SC-81 Cinnamon Stix onto the plate. Add a pinch of AC-310 Silkscreen Medium. Mix with a palette knife until it becomes the consistency of peanut butter. You may need to add more Silkscreen Medium or glaze.
  6. Place the “NO PROB LLAMA” in the center of the ornament. While holding it firmly in place, take a small amount of premixed Silkscreen Medium, and gently rub in circles starting in the center and working outward. Slowly pull up the screen to avoid smearing.
  7. Using the Script Liner with SG-302 Snowfall, apply one coat to the top and bottom sections of the front of the ornament.
  8. Using the Script Liner with SG-702 Celebration, apply one coat over the SG-302 Snowfall areas.
  9. Use SG-403 Red to make a line between the three sections on the front of the ornament.
  10. Use SG-405 Green to make a horizontal line of dots between the “NO PROB” and “LLAMA”.
  11. Using the Script Liner and Soft Fan with SC-81 Cinnamon Stix, apply two coats to the edge and back of the ornament. Allow glaze to dry between coats.
  12. Using the Soft Fan, apply one coat of S-2101 Clear Brushing Glaze or dip into NT-CLR Clear Dipping Glaze.

custom-css-security