Ruffle Ware Bunny Plate

 

Products Used

Bisque
  • MB-107 Ruffle Ware Dinner Plate
Color
  • FN-011 Light Blue, FN-026 Salmon Mousse, SC-46 Rawhide, SC-83 Tip Taupe, SC-95 Pinkie Swear, SC-88 Tu Tu Tango, SC-97 Cant-elope, SC-11 Blue Yonder, SC-6 Sunkissed, SC-13 Grapel, SC-27 Sour Apple, SC-51 Poo Bear, SC-15 Tuxedo, CG-963 Kaleidoscope

Decorating Accessories

  • BT-910 Synthetic Sponge, AC-230 Clay Carbon Paper, CB-110 #10/0 Mini Liner, CB-106 #6 Script Liner, CB-604 #4 Soft Fan, CB-602 #2 Soft Fan

Miscellaneous Supplies

 

122 Ruffleware Bunny Plate
Designer: Tim McPherson
 
 

Instructions

  1. Begin with a properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the CB-604 #4 Soft Fan, apply 3 coats of Foundation FN-011 Light Blue to the top area up to the raised border.
  3. Using the AC-230 Clay Carbon Paper and a pencil, trace on the pattern.
  4. Using the CB-106 #6 Script Liner, apply 3 coats of SC-83 Tip Taupe to the spots and the ear that is folded over.
  5. Using the CB-106 #6 Script Liner, apply 3 coats of SC-46 Rawhide to the bunny excluding the spots, inside of the ears and the nose.
  6. Using the CB-106 #6 Script Liner, apply 3 coats of SC-95 Pinkie Swear to the inside of the ears and the nose.
  7. Using the CB-106 #6 Script Liner, side load in SC-51 Poo Bear and shade around the inside edges and around the spots on the bunny.
  8. For the eggs, apply 3 coats of the following colors to your desired areas on each one using the CB-106 #6 Script Liner. The egg colors are SC-95 Pinkie Swear, SC-88 Tu Tu Tango,  SC-97 Cant-elope, SC-11 Blue Yonder, SC-6 Sunkissed, SC-13 Grapel and SC-27 Sour Apple.
  9. Orange Butterfly: Using the CB-106 #6 Script Liner, apply 2 coats of SC-97 Cant-elope, then tip into SC-88 Tu Tu Tango and apply the 3rd coat. Add brush handle dots to the wings with SC-88 Tu Tu Tango.
  10. Green Butterfly: Using the CB-106 #6 Script Liner, apply 2 coats of SC-6 Sunkissed, then tip into SC-27 Sour Apple and apply the 3rd coat. Add brush handle dots to the wings with SC-27 Sour Apple.
  11. Dragonfly: Using the CB-106 #6 Script Liner, apply 2 coats of SC-13 Grapel, then tip into SC-95 Pinkie Swear and apply the 3rd coat.
  12. Side load the CB-106 #6 Script Liner in SC-27 Sour Apple and shade the area below the eggs and bunny.
  13. Using the CB-110 #10/0 Mini Liner, outline and detail the entire piece with SC-15 Tuxedo. Also add the eyes and whiskers to the bunny.
  14. Using both the CB-106 #6 Script Liner and the CB-604 #4 Soft Fan, apply 3 coats of Foundation FN-026 Salmon Mousse to the back and raided edge, butting it up to the Foundation FN-011 Light Blue area.
  15. Using the CB-602 #2 Soft Fan, apply 1 coat of CG-964 Kaleidoscope to the flat border area.
  16. Stilt and fire to shelf cone 05/06.

custom-css-security