Frankenstein Can-It
- Details
- Last Updated: Thursday, 21 August 2014 15:51
Products Used
Bisque- MB-1404 Gallon Can-It
- SC-15 Tuxedo
- SC-27 Sour Apple
- SC-78 Lime Light
- SC-40 Blueberry Hill
- SC-16 Cotton Tail
- SS-81 Shimmering Silver
- FN-009 Black
- S-2101 Crystal Clear Brushing
- CB-110 #10/0 Liner
- CB-106 #6 Script Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponge
- AC-230 Clay Carbon Paper
- Pencil
- Coat Hanger
- Pattern: Frankencan
Designer: Marcia Roullard
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Roll the inside with slightly thinned FN-009 Black, drain excess. Brush to the lip of the can with two coats, with FN-009 Black.
- Freehand draw or use AC-230 Clay Carbon Paper to trace pattern.
- Use CB-604 Soft Fan to brush in long strokes of SC-78 Lime Light, one coat, add in some strokes of SC-27 Sour Apple randomly, brush a second coat of SC-78 Lime Light to the eyelids and nose, shade SC-27 Sour Apple around the eyes.
- With CB-106 Script Liner streak in SC-40 Blueberry Hill thinned, randomly.
- Brush the eyes with SC-16 Cotton Tail and the iris with two thinned coats of SC-40 Blueberry Hill.
- Outline the face detail and eyes with SC-15 Tuxedo using CB-110 Liner.
- Brush two coats of SC-15 Tuxedo to the hair.
- Dip or brush with two coats of S-2101 Crystal Clear Brushing.
- Fire to cone 06/05.
- Bend coat hanger using round form to make the handle. Brush with SS-81 Shimmering Silver.
- Use SS-81 Shimmering Silver to add metal highlights to the lower edge and upper lips of the can. After application, thin the upper lip application of SS-81 Shimmering Silver with water and a brush to create a mottled appearance.