Element Rhino
- Details
- Last Updated: Monday, 10 August 2015 19:10
Products Used
Bisque- MB-1430 Faceted Rhino
- EL-125 Sahara Sands, SG-401 Black
Decorating Accessories
- ST-127 Crackle Stamp, CB-604 Soft Fan, Bt-910 Synthetic Sponge
Miscellaneous Accessories
- 2" Foam Roller
Designer: Marcia Roullard
Instructions
- Begin with a properly fired shelf cone 04 Bisque. Moisten a clean sponge and wipe bisque to remove any dust making sure not to over saturate the bisque.
- Brush the rhino with two coats of EL-125 Sahara Sands, brushing in different directions with CB-604 Soft Fan.
- Allow to dry.
- Roll SG-401 Black over the ST-127 Crackle stamp with foam roller making sure not to overload the applicator. Too much color will result in a blurred messy image. Turn the stamp over onto the desired area and press down on the stamp so that the stamp is making contact with the area you want stamped. Make sure not to rub back and forth or this will cause a double image. Stamp the rhino leaving some of the small faceted shapes plain. Allow to dry
- Outline all the faceted shapes with SG-401 Black.
- Fire to self cone 06.