Flower Camper Container

• Print
• Email

Details

Last Updated: Tuesday, 19 February 2019 21:54

Instructions

1. Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust. 

2. Mix SC-9 Jaded with water to thin. Using the Script Liner, apply one coat to the body of the camper. Apply thicker to the recessed areas for shading. 

3. Use the flower and circle stamps to stamp the paper. Cut a circle around the negatives. These will be used as stencils. 

4. Start with one side of the camper. Arrange the flower and circle stencils where you want them. Dip them in water and stick them to the camper. Using the Script Liner with SC-16 Cotton Tail, apply 1 coat over the stencils. Repeat for all sides of the camper.

6. Using the Script Liner with SC-6 Sunkissed, SC-31 The Blues, SC-88 Tu Tu Tango and SC-97 Cant-elope, apply 2 coats to the flowers and circles on the camper. Allow glaze to dry between coats. Before the last coat is dry, remove the stencils. 

7. Using the Script Liner with SC-60 Silver Lining, apply 2 coats to the windows. Allow glaze to dry between coats. Apply a third coats and shade with SC-15 Tuxedo. 

8. Using the Script Liner with SC-60 Silver Lining, apply 2 coats to the bumper and hubcaps. Allow glaze to dry between coats. 

9. Using the Script Liner with SC-9 Jaded, apply 2 coats to the door and awnings. Allow glaze to dry between coats.

10. Using the Script Liner with SC-15 Tuxedo, apply 2 coats to the tires and underside of the camper. Allow glaze to dry between coats. 

11. Using the Detail Liner with SC-15 Tuxedo, outline the details on the camper.

12. Using the Soft Fan, apply 2 coats of S-2101 Clear Brushing Glaze or dip into NT-CLR Clear Dipping Glaze.

13. Fire to cone 06.