Daisy Splash Bottle Cap

 

 
 
Products Used

Bisque
  • MB-1366 Bottle Cap
Color
  • SC-6 Sunkissed
  • SC-15 Tuxedo
  • SC-16 Cotton Tail
  • SC-75 Orange-A-Peel
  • SC-78 Lime Light
  • FN-047 Light Pink
Decorating Accessories
  • CB-106 #6 Script Liner
  • CB-110 #10/0 Liner
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
  • AC-230 Clay Carbon Paper
Daisy_Bottle_Cap
 
 
Additional Materials
 
Project Info
  • Designer: Tim McPherson
  • Skill Level: Basic
  • Time: 1½ hours

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-047 Light Pink to the entire piece. Allow to dry.
  3. Using a pencil and AC-230 Clay Carbon Paper, trace on the flower towards the center of the piece.
  4. Using the Watercolor Marker, create a border around the flower about 1 to 2” wide from the outside edge.
  5. Using a CB-604 #4 Soft Fan, apply 2 coats of SC-6 Sunkissed to the top, outside edge then blend with SC-75 Orange-A-Peel and continue to the bottom edge.
  6. Using a CB-106 #6 Script Liner, apply 2 coats to the flower petals.
  7. Using a CB-106 #6 Script Liner, apply 2 coats of SC-78 Lime Light to the flower center.
  8. Using a CB-110 #10/0 Liner, add some accent strokes into each petal with SC-78 Lime Light.
  9. Using a CB-110 #10/0 Liner loosely outline the flower design and the banded areas with SC-15 Tuxedo.
  10. Thin the SC-15 Tuxedo with water, and using a CB-604 #4 Soft Fan, spatter the piece. Allow to dry.
  11. Stilt and fire to shelf cone 06/05.

custom-css-security