Lemon-Lime Pitcher

• Print
• Email

Details

Last Updated: Thursday, 24 May 2012 17:46

Use template to create a set of drinking cups as well.

1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean Sponge and wipe Bisque to remove any dust.
2. Using a CB-618 #8 Soft Fan Brush, apply 3 Coats of FN-013 Light Yellow to the entire outside (including top rim) of pitcher.
3. Using a CB-618 #8 Soft Fan Brush, apply 3 Coats of FN-007 Green to the entire inside of pitcher and the handle. Allow to dry.
4. Using a pencil and AC-230 Clay Carbon Paper, trace on the pattern.
5. Using a CB-604 #4 Soft Fan, apply 2 Coats of SC-6 Sunkissed to the Lemons on top and about half the fruit on bottom.
6. Using a CB-604 #4 Soft Fan, apply 2 Coats of SC-78 Lime Light the Limes on top and the rest of the fruit on bottom.
7. Using a CB-106 #6 Script Liner, apply 2 Coats of SC-6 Sunkissed to the line around top and 2 Coats of SC-78 Lime Light to the bottom line around top.
8. Using a CB-106 #6 Script Liner, apply 2 Coats of SC-26 Green Thumb to the leaves.
9. Using a CB-106 #6 Script Liner, apply 2 Coats of SC-25 Crackerjack Brown to the stems.
10. Using a CB-106 #6 Script Liner, apply 2 Coats of SC-16 Cotton Tail to the Flowers, and the outside edge of the opened lime and lemon.
11. Using a CB-110 #10/0 Mini Liner, apply 2 Coats of SC-16 Cotton Tail to the lines inside the open lemon and lime.
12. Using a stamp or some other item that will create a random texture for lemon and lime skins, place a random pattern of SC-42 Butter Me Up on lemon skins and SC-27 Sour Apple on lime skins.
13. Using a CB-110 #10/0 Liner, outline all with 1 coat of SC-15 Tuxedo.
14. Stilt and fire to shelf cone 06.