Crystal Garden Ornaments (E)

• Print
• Email

Details

Last Updated: Tuesday, 10 October 2017 15:19

Designer: Marcia Roullard

 

 

Instructions

1. In leather-hard greenware, pencil in the design cuts, use an Exacto knife to cut the design, clean the edges with a stiff wet brush.  When dry, fire to cone 04.
2. For CD607 and CD605 thin slightly FN002 Yellow, pour to the inside, turn to coat, pour out the excess, wipe off excess glaze from the outside with a damp sponge.  Thin FN050 Coral, pour to the inside of CD607, same as above.
3. Brush CG979 Meadow 2-3 coats with CB604 Soft Fan to the body of CD606 Garden Ornament, brush the rings with CG718 Blue Caprice two coats, use CB106 Script Liner.
4. Brush the body of CD605 with two coats of CG966 Tiger Lily, and one coat of CG756 Firecracker, patting it on leaving some of the Tiger Lily showing.  Brush the rings with CG717 Pistachio.
5. Brush three coats of S2724 Lotus Blossom to the body of CD607 Garden Ornament, brush the rings and ball top with 2 coats of SC42 Butter Me Up, float SC89 Cutie Pie Coral around the rings, with CB106 Script Liner.
6. Fire to cone 06.
7. Stake on copper tubing.