Blended Stoneware lantern (S)

 

Products Used

Mold
  • CD-002 Lantern

Color
  • SW-104 Black Walnut
  • SW-118 Sea Salt
  • SC-27 Sour Apple
  • SC-52 Toad-ily Green
  • SC-78 Lime Light

Decorating Accessories

  • SLS-001 Stoneware White Casting Slip
  • SB-604 #4 Soft Fan

Miscellaneous Accessories

  • Craft Knife

 

TM stoneware lantern
 
 
Designer: Timothy McPherson
 
 

Instructions

  1. Cast the CD-002 Lantern Mold with SLS-001 Stoneware White Casting Slip to your desired thickness.
  2. When leather hard, remove from the mold and cut out the openings with a craft knife.
  3. When dry, clean and bisque fire to shelf cone 04.
  4. Using the CB-604 # 4 Soft Fan, apply 2 coats of SW-104 Black Walnut to the bottom side wall, the top side wall and the inside collar area, keeping any color off the very bottom of the piece.
  5. Using the CB-604 # 4 Soft Fan, apply 1 coat of SW-118 Sea Salt to the center area and to the inside, except for the upper top area that has already been painted.
  6. Using the CB-604 # 4 Soft Fan, apply to the top 1/3 area of the Sea Salt 1 coat of SC-78 Lime Light, followed by 1 coat of SC-27 Sour Apple to the center area and 1 coat of SC-52 Toad-ily Green to the bottom 1/3.
  7. Place on a well kiln washed shelf and fire to shelf cone 6.

custom-css-security