Bright Dragon

 

Products Used

Bisque
  • CD-1359 Asian Dragon

Color
  • SC-6 Sunkissed

  • SC-11 Blue Yonder

  • SC-12 Moody Blue

  • SC-15 Tuxedo

  • SC-16 Cotton Tail

  • SC-24 Dandelion

  • SC-25 Crackerjack Brown

  • SC-73 Candy Apple Red

  • SC-74 Hot Tamale

  • SC-97 Cant-elope

  • S-2101 Clear

Decorating Accessories

  • CB-106 Script Liner

  • CB-110 Liner

  • B-604 Soft Fan

 

dragon mold
Designer: Marcia Roullard
 
 

Instructions

1.  Fire greenware to 04 bisque, use a damp sponge to remove dust.

2.  Brush the body of the dragon with one coat of SC-97 Cant-elope, while the color is wet remove color from the scales by rubbing your thumb against the color. You can also remove with a damp sponge, although it can remove more than desired with a sponge.

3. Shade the feet, legs, around the head with SC-75 Orange A Peel, shade around the back, tail and the breast, nose with SC-73 Candy Apple Red.  Thin Candy Apple Red and brush over the tail area.

4.  Brush two coats of SC-73 Candy Apple Red over the breast, remove some from the lower center breast area, brush over with Cant-elope.

5. Brush the dragon's spines at the head area with SC-73 Candy Apple red, wipe back to highlight the tops of the spines.

6.  Brush the inside of the mouth and tongue with SC-74 Hot Tamale, 2-3 coats. Brush the nose with SC-74 Hot Tamale, shade around the nose and snout with SC-74 Hot Tamale, use CB-106 Script Liner.

7. Brush two coats of slightly thinned SC-11 Blue Yonder to the back spines and wings, wipe back some with your finger to highlight. When dry, shade or float SC-12 Moody Blue at the base of the spines.

8.  Remove the color from the brows, wishers, and edge around the mouth, brush with two coats of SC-16 Cotton Tail.

9. The eye is SC-25 Crackerjack Brown, the pupil is SC-15 Tuxedo, the outline is SC-15 Tuxedo. Use CB-110 Liner to outline the whiskers, mouth teeth, wings.

10. Brush on one coat of S-2101 Clear with the fan brush.

11. Fire to cone 05/06.

custom-css-security