Under the Sea Mugs
- Details
- Last Updated: Tuesday, 16 December 2014 19:25
Products Used
Bisque- MB-1407 Whale Mug
- MB-1408 Octopus Mug
- MB-1409 Seahorse Mug
-
MB-1407 Whale Mug:
- SC-6 Sunkissed
- SC-15 Tuxedo
- SC-30 Blue Dawn
- SC-97 Cant-elope
- S-2101 Crystal Clear
-
MB-1408 Octopus Mug:
- SC-2 Melon-choly
- SC-15 Tuxedo
- SC-77 Glo Worm
- SC-89 Cutie Pie Coral
- S-2101 Crystal Clear
-
MB-1409 Seahorse Mug
- SC-11 Blue Yonder
- SC-15 Tuxedo
- SC-75 Orange A Peel
- SC-88 Tu Tu Tango
- SC-97 Cant-elope
- S-2101 Crystal Clear
Decorating Accessories
- BT-910 Synthetic Sponge
- CB-110 #10/0 Mini Liner
- CB-106 #6 Script Liner
- CB-602 #2 Soft Fan
- CB-604 #4 Soft Fan
Designer: Marcia Roullard
Instructions
MB-1407 Whale Mug:
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using CB-106 #6 Script Liner and CB-602 #2 Soft Fan, apply 3 coats of SC-30 Blue Dawn to the top of the whale's body, leaving the chest of the whale unglazed.
- Using CB-604 #4 Soft Fan and CB-106 #6 Script Liner, apply 3 coats of SC-6 Sunkissed to the exterior of the mug, leaving the whale.
- Using CB-110 #10/0 Mini Liner, outline the whale with SC-15 Tuxedo.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-97 Cant-elope to the interior of the mug.
- Using BT-910 Synthetic Sponge, wipe off glaze on the rim of the mug.
- Using CB-604 #4 Soft Fan, apply 1 coat of S-2101 Crystal Clear to the interior and exterior of mug.
- Stilt and fire to shelf cone 06/05.
MB-1408 Octopus Mug:
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using CB-106 #6 Script Liner, apply 3 coats of SC-2 Melon-choly to the octopus.
- Slightly thin SC-89 Cutie Pie Coral with water (3:1). Using CB-106 #6 Script Liner, apply 1 thinned coat of SC-89 Cutie Pie Coral over the tentacles, fading into the body of the octopus.
- Using CB-604 #4 Soft Fan and CB-106 #6 Script Liner, apply 3 coats of SC-77 Glo Worm to the exterior of the mug, leaving the octopus.
- Using CB-110 #10/0 Mini Liner, outline the octopus with SC-15 Tuxedo.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-89 Cutie Pie Coral to the interior of the mug.
- Using BT-910 Synthetic Sponge, wipe off glaze on the rim of the mug.
- Using CB-604 #4 Soft Fan, apply 1 coat of S-2101 Crystal Clear to the interior and exterior of mug.
- Stilt and fire to shelf cone 06/05.
MB-1409 Seahorse Mug:
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using CB-106 #6 Script Liner, apply 3 coats of SC-97 Cant-elope to the head and chest of the seahorse. Blend with 3 coats of SC-75 Orange-A-Peel into the middle chest section, finishing off with 3 coats of SC-88 Tu Tu Tango towards the lower portion of the seahorse.
- Using CB-110 #10/0 Mini Liner, apply 2 coats of SC-75 Orange-A-Peel to the eyes.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-11 Blue Yonder to the exterior of the mug, leaving the seahorse.
- Using CB-604 #4 Soft Fan, apply 3 coats of SC-88 Tu Tu Tango to the interior of the mug.
- Using CB-110 #10/0 Mini Liner, outline the detail of the seahorse with SC-15 Tuxedo.
- Using BT-910 Synthetic Sponge, wipe off glaze on the rim of the mug.
- Using CB-604 #4 Soft Fan, apply 1 coat of S-2101 Crystal Clear to the interior and exterior of mug.
- Stilt and fire to shelf cone 06/05.