Polished Pebbles Mirror Black Sliptrail

• Print
• Email

Details

Last Updated: Tuesday, 23 April 2019 17:47

Designer: Nate Klein

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Using X10063 Xiem Precision Applicator (18 Gauge), fill bulb up with SW-132 Mirror Black and slip trail 3 rows of squares onto exterior of piece leaving a 1” band around the top.
3. Attach AC224 Plastic Detailer Cap to SC-11 Blue Yonder and apply a horizontal line inside the squares.
4. Using CB-604 #4 Soft Fan, apply 3 coats of SW-132 Mirror Black to top 1” band. Take care to recede the 3rd coat about ½”.
5. Using CB-604 #4 Soft Fan, apply 3 coats of SW-126 Polished Pebbles to the exterior and interior. Take care to not brush over the SW-132 Mirror Black band.
6. Using a damp sponge, remove any glaze on the bottom of the piece.
7. Do not stilt.
8. Fire to cone 5/6.