Cordovan & Polished Pebbles

 

Products Used

Bisque
  • SB-113 12" Vase or
  • Hand-Thrown Shape
Color
  • SW-128 Cordovan
  • SW-126 Polished Pebbles
  • SC-32 Bluebeard
  • SC-74 Hot Tamale
Decorating Accessories
  • BT-910 Synthetic Sponge
  • CB-604 #4 Soft Fan
  • X10063 Xiem Precision Applicator (18 Gauge)
  • AC224 Plastic Detailer Cap
cordovan polished pebbles

Designer: Nate Klein
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using CB-604 #4 Soft Fan, apply 3 coats SW-128 Cordovan to the top 1” band of piece.
  3. Using X10063 Xiem Precision Applicator (18 Gauge), fill bulb up with SW-128 Cordovan and slip trail 3 rows of approximately ¾” loops onto exterior of piece directly below the SW-128 Cordovan band.
  4. Attach AC-224 Plastic Detailer Cap to SC-74 Hot Tamale and loop inside the bottom row of loops.
  5. Attach AC-224 Plastic Detailer Cap to SC-32 Bluebeard and dot inside loops.
  6. Using CB-604 #4 Soft Fan, apply 3 coats SW-126 Polished Pebbles to interior and exterior of piece. Take care to not brush over SW-128 Cordovan band.
  7. Using a damp sponge, remove excess glaze on the bottom of piece.
  8. Do not stilt and fire to cone 5/6

custom-css-security