Snowfall Tumblers

• Print
• Email

Details

Last Updated: Monday, 07 August 2017 14:33

Designer: Todd Hickerson

 

Instructions

(Red and White)

1. Apply 2 coats of SC-74 Hot Tamale inside and out
2. Apply 2 thick coats of SG-302 Snowfall
3. Drag fingers or tool thru the Snowfall
4. Apply 3 coats of SW-401 Mayco flux on top edge of tumbler
5. SC-74 Orange-A-Peel sprayed on areas with an atomizer
6. Fire to cone 5/6

(Red and Grey)

1. Apply 2 coats of SC-74 Hot Tamale inside and out. 
2. Mix SG-302 Snowfall with SC-15 Tuxedo
3. Apply 2 thick coats of the SG-302 Snowfall/SC-15 Tuxedo blend
4. Drag fingers or tool thru the blend
5. Apply 3 coats of SW-401 Mayco flux on top edge of tumbler
6. Fire to cone 5/6

(Purple and White)

1. Apply 3 coats of SW-134 Eggplant inside and out
2. Apply 2 thick coats of SG-302 Snowfall
3. Drag fingers or tool thru the Snowfall
4. Apply 3 coats of SW-401 Mayco flux on top edge of tumbler
5. Fire to cone 5/6

(Black/Brown/Green)

1. Apply 3 coats of SP-215 Speckled Tuxedo inside and out
2. Mix SG-302 Snowfall with SP-210 Teal Next Time
3. Apply 2 thick coats of theSG-302 Snowfall with SP-210 Teal Next Time blend
4. Drag fingers or tool thru the blend
5. Apply 3 coats of SW-401 Mayco flux on top edge of tumbler
6. Fire to cone 5/6

(Black/Purple/Green)

1. Apply 3 coats of SC-15 Tuxedo two thirds up from bottom on the outside of tumbler
2. Apply 3 coats of SP-Speckled Teal Next Time on top one third of tumbler and the entire inside
3. Apply one coat of SC-Grapel on rim of tumbler
4. Mix SG-302 Snowfall with SP-210 Teal Next Time
5. Apply 2 thick coats of theSG-302 Snowfall with SP-210 Teal Next Time blend
6. Drag fingers or tool thru the blend
7. Apply 3 coats of SW-401 Mayco flux on top edge of tumbler
8. Fire to cone 5/6