Honeycomb Tumbler Combo

• Print
• Email

Details

Last Updated: Monday, 04 February 2019 18:58

 

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Apply 2 coats of SW-117 Honeycomb to the outside of the tumbler. Leave about ½” from the top lip and ¼” from the bottom.
3. Apply 3 coats if SW-172 Macadamia to the inside of the tumbler and 2 coats to the outside. Leave about ¼” from the bottom and do not glaze the very bottom. If you’re feeling experimental, feel free to reverse the order of application for a similar, but different look!
4. Use a clean sponge to wipe the bottom clean any glaze that may have gotten out of place.
5. Let dry completely and fire in oxidation to cone 6.