Sisal - Manganese Combo

 

 
Products Used

Bisque
  • SB-103 Wavy Mug
  • SB-105 Rimmed Dinner Plate
  • SB-106 Rimmed Bowl
Color
  • SW-103 Sisal
  • SW-303 Manganese Wash
Decorating Accessories
  • CB-604 #4 Soft Fan
  • BT-910 Synthetic Sponge
Sisal_Maganese_Combo
 
 
Additional Materials
  • Banding Wheel
 
Project Info
  • Designer: Nathan Klein
  • Skill Level: Basic
  • Time: 1½ hours
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 1 coat SW-303 Manganese Wash in a circular motion to the front of SB-106 Rimmed Bowl and SB-105 Rimmed Dinner Plate on a banding wheel.
  3. Using a CB-604 #4 Soft Fan, apply 1 coat of SW-303 Manganese Wash to the outside of SB-103 Wavy Mug with horizontal brush strokes. Leave a ½ inch border around the foot of the mug unglazed.
  4. Using a CB-604 #4 Soft Fan, apply 3 coats of SW-103 Sisal to the front and back of SB-106 Rimmed Bowl and SB-105 Rimmed Dinner Plate in a circular motion on a banding wheel.
  5. Using a CB-604 #4 Soft Fan, apply 3 coats of SW-103 Sisal to inside and outside of SB-103 Wavy Mug. The first coat on the outside of the mug can be brushed down to the foot. It is important to recede the subsequent coats an inch each time! If you do not recede the coats, the glaze will run onto the kiln shelf.
  6. With a damp sponge, wipe off any excess glaze off the foot of plate.
  7. Place on a high-fired kiln washed kiln shelf.
  8. Fire to shelf cone 5/6.

custom-css-security