Crystal Bot Bank
- Details
- Last Updated: Thursday, 22 May 2014 15:47
Bisque
- MB-1376 Robot Bank - Nutz n'Boltz
- SC-10 Teal Next Time
- SC-15 Tuxedo
- SC-24 Dandelion
- SC-33 Fruit of the Vine
- SC-87 Ruby Slippers
- CG-954 Wildfire
- S-2101 Crystal Clear Brusing
- CB-106 #6 Script Liner
- CB-110 #10/0 Liner
- CB-202 #2 Detail Liner
- CB-604 #4 Soft Fan
- BT-910 Synthetic Sponge
- Designer: Carmen Allen
- Skill Level: Basic
- Time: 1½ hours
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using a CB-106 #6 Script Liner, apply 3 coats of SC-24 Dandelion to the hands, upper arms, jaw, and inside of the buttons.
- With the same brush, apply 3 coats of SC-87 Ruby Slippers to the bottom of the arm and the face. Then, apply, SC-10 Teal Next Time to the top of the head, shoulder pad, wrists, and around the bottom of the feet.
- Using a combination of the CB-202 #2 Detail Liner and the CB-106 #6 Script Liner, apply 3 coats of SC-33 Fruit of the Vine around the eyes, ears, shoulder joint, and elbow joint. Apply only 1 coat on the neck, elbows, and legs.
- Using a CB-202 #2 Detail Liner, paint the outside edge of the buttons with 2 coats; one with SC-10 Teal Next Time, one with SC-87 Ruby Slippers, and one with SC-33 Fruit of the Vine.
- With the same brush, apply 1 coat of SC-15 Tuxedo to make a heartbeat line in the monitor box.
- Using a CB-106 #6 Script Liner, apply 3 coats of CG-954 Wildfire to the body and feet.
- Apply, 1 coat of S-2101 Crystal Clear Brushing to the legs, elbows, neck, top coil, and monitor. Allow to dry.
- Stilt and fire to shelf cone 06/05.