Time for a Walk

 

 
Products Used

Bisque
  • MB-979 - Heart Plaque
Color
  • FN-009 - Black
  • SC-6 - Sunkissed
  • SC-16 - Cotton Tail
  • SC-27 - Sour Apple
  • SC-76 - Cara-bein Blue
Decorating Accessories
  • CB-106 - #6 Script Liner
  • CB-604 - #4 Soft Fan
  • BT-910 - Synthetic Sponges
mb979 nk006 dog
 
 
Additional Materials
 
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Basic
  • Time: Place 2 hours
 

Instructions

 

 

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-009 Black to the entire heart and the knob.
  3. Using a CB-604 #4 Soft Fan, apply 2 heavy coats of SC-16 Cotton Tail to the front of the heart plaque. Allow to dry.
  4. With a pencil, trace on an area for the bee's body and the space for the dog.
  5. Using a CB-604 #4 Soft Fan when possible or the CB-106 #6 Script Liner, apply 2 coats of SC-6 Sunkissed to the bee's body. Thin SC-76 Cara-bein Blue and brush around the sky area approximately half way up the dog's body to the top of the plaque, brushing around the bee's body and the dog's body. Slightly thin SC-27 Sour Apple and brush the rest of the heart, brushing around the dogs body and brushing color into the blue where the two colors meet.
  6. Apply 2 coats to the top area of the moon knob with SC-76 Cara-bein Blue. Then brush 2 coats of SC-6 Sunkissed over part of the knob.
  7. Stilt and fire to shelf cone 06, with knob on lower edge, so as to fuse the knob on during firing.
  8. Review the instructions on image transfer to create your image.
  9. Stilt and fire to shelf cone 06

custom-css-security