Easter Egg Bank

Start saving for spring by making this cute Easter Egg Bank using Foundations and Stroke & Coat.

Products Used

  • MB-1088 - Round Bank
  • FN-011 - Light Blue
  • SC-11 - Blue Yonder
  • SC-16 - Cotton Tail
  • SC-43 - Lettuce Alone
Decorating Accessories
  • CB-106 - #6 Script Liner
  • CB-604 - #4 Soft Fan
  • BT-910 - Synthetic Sponges
Additional Materials
  • Pencil
  • Banding Wheel
  • Circle Template
  • Lace
  • ½" Masking Tape
  • Download Pattern: Easter Bunny
Project Info
  • Designer: Marcia Roullard
  • Skill Level: Intermediate
  • Time: 2 hours


  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-011 Light Blue to the bank. Allow to dry.
  3. Use a banding wheel center the bank on the wheel. Using a pencil, draw a 2" section in the center of the bank.
  4. Use the 1/2" masking tape to tape on the inside of the two pencil lines.
  5. Brush on another coat of the FN-011 Light Blue to the taped off area. Lay the lace into the wet color (flat side down). Brush back over the lace with another coat of the FN-011 Light Blue. Let dry somewhat, then brush over with 2 coats of SC-16 Cotton Tail. Remove the lace when the color looses its shine.
  6. Using a CB-604 #4 Soft Fan, apply 2 coats of SC-43 Lettuce Alone to the remainder of the egg. Remove the tape before the last coat dries.
  7. Use a circle template to pencil in large polka dots to the green area of the egg. Using the CB-106 #6 Script Liner, paint the dots with SC-16 Cotton Tail.
  8. Brush on SC-11 Blue Yonder to some detail of the lace area. Allow to dry.
  9. Do not Clear Glaze.
  10. Stilt and fire to shelf cone 06.