Zombie Unicorn
- Details
- Last Updated: Thursday, 10 October 2019 21:10
Products Used
Bisque- MB-1530 Unicorn Plaque
Color
- SC-6 Sunkissed
- SC-13 Grapel
- SC-15 Tuxedo
- SC-16 Cotton Tail
- SC-60 Silver Lining
- SC-74 Hot Tamale
- SC-98 Slime Time
Decorating Accessories
- AC-230 Clay Carbon Paper
- RB-144 #4 Soft Fan
- RB-106 #6 Script Liner
- RB-110 10/0 Detail Liner
Miscellaneous Accessories
-
Sponge
-
Water
-
Palette
-
Pencil
Instructions
-
Begin with properly fired cone 04 bisque. Moisten a sponge and wipe bisque to remove any dust.
-
Freehand the design or using the AC-230 Clay Carbon Paper and the pattern, trace the eye, mouth and rib areas.
-
Squeeze about 2 TBS of SC-98 Slime Time onto the palette and thin with water. Using the Soft Fan, apply 3 coats to the body, legs, and ears of the unicorn. Allow glaze to dry between coats.
-
Using the Script Liner with SC-74 Hot Tamale, apply 3 coats to the area under the eye, in the mouth, and between the ribs. Allow glaze to dry between coats.
-
Using the Detail Liner with SC-16 Cotton Tail, apply 3 coats to the ribs and teeth. Allow glaze to dry between coats. Shade with SC-60 Silver Lining.
-
Using the Script Liner with SC-6 Sunkissed, apply 3 coats to the hooves, horn, and eye. Allow glaze to dry between coats.
-
Squeeze about 2 TBS of SC-13 Grapel onto the palette and thin with water. Using the Script Liner, apply 3 coats to the mane and tail. Allow glaze to dry between coats.
-
Using the Detail Liner with SC-15 Tuxedo, apply 2 coats to the eye. Allow glaze to dry between coats. Use the Detail Liner to outline the details and add the stitches.
-
Using the Detail Liner with SC-16 Cotton Tail, apply 2 dots to the eye.
-
Fire to cone 06