Geo-Sedona

 

 
 
Products Used

Molds
  • CD-915 - 8" Slump Hump Plate
  • CD-1078 - Design Press Tools
  • CD-1079 - Design Wheel Press Tool
Color
  • FN-009 - Black
  • S-2732 - Sedona Sky
  • SC-15 - Tuxedo
  • SC-25 - Crackerjack Brown
  • SC-75 - Orange-A-Peel
  • SC-76 - Cara-bein Blue
  • S-2101 - Crystal Clear Brushing
Decorating Accessories
  • BT-910 - Synthetic Sponges
  • CB-106 - #6 Script Liner
  • CB-110 - #10/0 Liner
  • CB-604 - #4 Soft Fan
cd915 Sedona
 
 
Additional Materials
  • Moist Clay
  • ¼" Wood Slats
  • Canvas
  • Rolling Pin
  • Fettling Knife
  • Needle Tool
  • Sand Bag
 
Project Info
 

Instructions

 

 

  1. Roll clay ¼" thick between ¼" wood slats. Slump clay over the CD-915 8" Slump Hump Plate mold. Press in place using a sand bag and trim off edges with a needle tool.
  2. Use the triangle shape from CD-1078 Design Press Tools to press in the top edge. Press in point side up then point down continue to fill in the edge.
  3. Use the CD-1079 Design Wheel Press Tool to press in the next border.
  4. Press in square design from CD-1078 for the third border and the spiral shape from same mold for the last border.
  5. Allow the piece to dry thoroughly.
  6. Bisque fire to shelf cone 04.
  7. Thin SC-76 Cara-bein Blue, then brush over the border area with a CB-604 #4 Soft Fan. To antique, remove excess with a wet brush or a damp sponge.
  8. Using a CB-604 #4 Soft Fan, apply 2 coats of SC-25 Crackerjack Brown into the background of the second and third border.
  9. Using a CB-106 #6 Script Liner, apply 1 coat of SC-15 Tuxedo into the first border. Outline the squares and the spiral stamp with SC-15 Tuxedo.
  10. Using a CB-110 #10/0 Liner, apply 1 coat of SC-15 Tuxedo to detail the Design Wheel Tool stamped area.
  11. Dot the spiral and the triangle design with SC-75 Orange-A-Peel.
  12. Using a CB-604 #4 Soft Fan, apply 2 coats of S-2732 Sedona Sky to the center of the plate.
  13. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-009 Black to the back of the plate.
  14. Using a CB-604 #4 Soft Fan, apply 1 coat of Clear Glaze to the border area. Allow to dry.
  15. Stilt and fire to shelf cone 05/06.

custom-css-security