Welcome to the Mayco Archive site!

Anniversary Plate

• Print
• Email

Details

Last Updated: Tuesday, 29 April 2014 13:04

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Pencil off the center area of the plate for the photo.
3. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-16 Cotton Tail to the center area of the plate. Allow to dry.
4. When dry, tape off the SC-16 Cotton Tail area with 1/2" masking tape. Mark border edges for the various colors and then tape off the colors.
5. Using a CB-604 #4 Soft Fan, apply 3 coats of the following colors as seen in picture: SC-79 It's Sage, SC-80 Basketball, SC-46 Rawhide, SC-52 Toad-ily Green, SC-51 Poo Bear, SC-50 Orange Ya Happy.
6. Prepare to stamp by using an AC-213 Sponge on a Stick to pat SC-15 Tuxedo on the stamp. (If the stamp is new, wash it in soapy water and rinse to remove any residue.) Leave the tape on when you stamp so you can stamp past the edges.
7. Use the ST-392 Tickle Tickle stamp to stamp the SC-80 Basketball area. Use the ST-368 Ornate Border Stamp to stamp the SC-51 Poo Bear area. Use the ST-370 Asian Influence stamp to stamp the SC-46 Rawhide area.
8. Decorate the SC-52 Toad-ily Green area with flowers made with SC-51 Poo Bear and SC-50 Orange Ya Happy centers.
9. Remove all the masking tape.
10. Using a CB-604 #4 Soft Fan, apply 2-3 coats of S-2121 Shiny Black to the back of the plate. Allow to dry.
11. Stilt and fire to shelf cone 06.
12. Review the instructions on image transfer to create your image.
13. Stilt and fire to shelf cone 06.

• Commemoration