Simple Raccoon Mug
- Details
- Last Updated: Thursday, 21 December 2017 16:22
Products Used
Bisque
- MB-1414 Raccoon Mug
- SC-11 Blue Yonder
- SC-15 Tuxedo
- SC-16 Cotton Tail
- SC-26 Green Thumb
- SC-35 Gray Hare
- SC-75 Orange-A-Peel
- NT-CLR Clear Dipping or S-2101 Crystal Clear Brushing Glaze
- CB-106 #6 Script Liner
- CB-604 #4 Soft Fan
- CB-210 #10/0 Detail Liner
- BT-910 Synthetic Sponge
Designer: Chelsea Proctor
Instructions
- Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
- Using the Script Liner, apply 3 coats of SC-16 Cotton Tail to the belly, tips of the ears, nose, eye brows and the first stripe on the tail and then every third stripe after that.
- Using the Script Liner, apply 2 coats of SC-15 Tuxedo to the cheek area, inside the ears, and the third stripe on the tail and then every third stripe after that.
- Using the same brush, apply 3 coats of SC-35 Gray Hare on the rest of the body and the second stripe on the tail and every third stripe after that.
- With the Soft Fan, apply 3 coats of SC-75 Orange-A-Peel to the background of the mug. Only on the outside.
- Also with the Soft Fan, apply 3 coats of SC-11 Blue Yonder to the inside of the mug.
- Wipe off the rim of the mug with a damp sponge until there is no glaze left on the rim.
- Using the Script Liner, apply 2 coats of S-2101 Crystal Clear Brushing Glaze to the rim of the mug.
- Use the Detail Liner to apply 3 coats of SC-16 Cotton Tail to the eyes.
- Then apply 3 coats of SC-26 Green Thumb to the 2/3 of the eye with a detail liner brush. Leaving white at the tops of the eyes.
- To finish the eyes, use the Detail Liner to apply 2 coats of SC-15 Tuxedo to the eye. Make an oval shape at the bottom of the blue part of the eye with Tuxedo.
- Dip the Detail Liner in water and add some SC-15 Tuxedo. Make a thin line that outlines the squirrel and his details.
- Stilt and fire to shelf cone 04/05.