Cobbleleaves

• Print
• Email

Details

Last Updated: Wednesday, 02 May 2018 17:25

Tinting Cobblestones opens up many decorating options.

1. Begin with properly fired shelf cone 04 Bisque. Moisten a clean Sponge and wipe Bisque to remove any dust.
2. Pencil a V shape off to one side of the mug. Tape off area with the ¼" masking tape.
3. Using a CB-604 #4 Soft Fan, apply 3 Coats of S-2589 Bear Brown to the mug, except for taped off area, including inside. Remove the masking tape before the last coat dries to prevent chipping.
4. Using a CB-604 #4 Soft Fan, apply 3 Coats of SC-79 It’s Sage to the V shape area.
5. Using a pencil sketch on design.
6. Using a CB-106 #6 Script Liner, apply 2 Coats of SG-202 White Cobblestone to each leaf, apply the second coat over when the cobblestone loses its shine.
7. Apply the Stroke & Coat color over the Cobblestone when Cobblestone loses its shine.
8. Using a CB-106 #6 Script Liner, apply one coat of color over the leave as follows: Use SC-25 Crackerjack on the edges with SC-52 Toad-ly Green to the center, brush one with SC-51 Poo Bear with SC-25 Crackerjack to the inside. Brush one with SC-79 It’s Sage.
9. Apply 1 coat of SC-25 Crackerjack to the stems so they will show up on the Bear Brown Glaze.
10. Using a CB-110 #10/0 Liner, outline all with SC-15 Tuxedo.
11. Using AC-223 Lg. Writer tip with the plastic applicator, fill with the SG-202 Black Cobblestone, use to make loose spirals to fill in the SC-79 It’s Sage area of the mug. Use also to make some squiggle marks around the leaves.
12. Stilt and fire to shelf cone 06.