Stripe-a-Dot

• Print
• Email

Details

Last Updated: Monday, 09 April 2012 20:58

Some masking tape, couple paper dots-as-stencils: BAM!

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
2. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White on the outside of the box bottom and lid. Apply 3 coats on the inside of the box bottom and lid. Allow to dry.
3. Punch out about 10 dots. Apply the dots to the box lid by wetting the dots with water. Press with a paper towel to absorb any excess water.
4. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-77 Glo-Worm on the outside of the lid except the knob. Remove the paper dots after the glaze looses its shine.
5. Using a CB-106 #6 Script Liner, apply 3 coats of SC-11 Blue Yonder on the lid knob.
6. Stripe the bottom of the box with masking tape. Apply the tape on an angle.
7. Using a CB-604 #4 Soft Fan apply 3 coats of SC-11 Blue Yonder on the outside of the box bottom. Remove the tape after the glaze looses its shine.
8. Allow to dry.
9. Stilt and fire to shelf cone 06.