Dad's Day Bibelot

• Print
• Email

Details

Last Updated: Monday, 18 March 2019 15:11

Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.

Happy Fathers Day Ornament

1. With a pencil and AC-230 Clay Carbon Paper, trace on the pattern or sketch your own.
2. Using a CB-106 #6 Script Liner, apply 2-3 coats of SC-15 Tuxedo to the mustache and the side edge of the bottle cap.
3. With the SG-403 Red Designer Liner, outline the 'Happy Father’s Day' words.
4. With the SG-404 Blue Designer Liner, outline the 'Father’s Day' words an add dots around the top edge of the bottle cap. Allow to dry.
5. Using a CB-604 #4 Soft Fan, apply 2 coats of S-2101 Crystal Clear Brushing to the bottle cap or dip in Clear Glaze of choice. Allow to dry.

Dad Ornament

1. Using a CB-604 #4 Soft Fan, apply 1 thinned coat of SC-30 Blue Dawn. Avoid brush marks by making sure the color is thin enough to cove in 1 coat. Allow to dry.
2. Using the AC-213 Sponge on a Stick load the sponge with SC-12 Moody Blue. Tap the SC-12 Moody Blue onto the ST-343 Deco Circles Stamp then press the stamp gently onto the piece. Allow to dry.
3. Pencil the word 'Dad' on to the piece.
4. Using a CB-110 #10/0 Liner, Detail the word 'Dad' with SC-15 Tuxedo.  Allow to dry.
5. Using a CB-604 #4 Soft Fan, apply 2 coats of S-2101 Crystal Clear Brushing to the bottle cap or dip in Clear Glaze of choice. Allow to dry.

Stilt and fire to shelf cone 06/05.