Curry Key Keeper

 

Products Used

Bisque
  • MB-976 Free Form Plaque
Color
  • SC-46 Rawhide, SC-51 Poo Bear, SC-83 Tip Taupe, SC-94 Curry Around

Decorating Accessories

  • CB-602 #2 Soft Fan, CB-106 #6 Script Liner, AC-310 Silkscreen Medium, DSS-0117 Vintage/Retro, BT-910 Synthetic Sponge

Miscellaneous Accessories

  • Drill and Drill bit for cement, E-6000 Glue, Small cup holders

 

wpTMc KeyKeeper 1
Designer: Tim McPherson
 
 

Instructions

  1. Being with properly fired shelf cone 04 bisque.
  2. Using a masonry bit, 4 - 5 holes into the lower portion of the plaque. This is where the hooks will be placed.
  3. Moisten a clean sponge and wipe bisque to remove any dust.
  4. Using the CB-602 #2 Soft Fan, apply 3 coats of SC-46 Rawhide to the inside area of the plaque, up to the recessed area.
  5. Mix a small amount of AC-310 Silkscreen Medium into SC-83 Tip Taupe and mix to a thin peanut butter consistency.
  6. Using both the large and small keys from DSS-0117 Designer Silkscreen Vintage/Retro, fill in the background.
  7. Mix a small amount of AC-310 Silkscreen Medium to SC-51 Poo Bear and mix to a thin peanut butter consistency.
  8. Using both the large and small keys from the same Silkscreen, add a 2nd layer to the plaque.
  9. Mix a small amount of AC-310 Silkscreen Medium to SC-94 Curry Around and mix to a thin peanut butter consistency.
  10. Using both the large and small keys from the same Silkscreen, add a 3rd layer.
  11. Mix a small amount of AS-310 Silkscreen Medium to SC-14 Jave Bean and mix to a thin peanut butter consistency.
  12. Using both the large and small keys from the same Silkscreen add a 4th layer.
  13. Using a damp sponge, remove any color from the border.
  14. Using both the Soft Fan and the #6 Script Liner, apply 3 coats of SC-94 Curry Around to the border, edges and back of the plaque.
  15. Stilt and fire to shelf cone 05./06.
  16. Using the E-6000 Glue, glue in the hooks.

custom-css-security