Trio of House Tray

 

Products Used

Bisque
  • MB-1287 Home Décor Tray
Color
  • SC-7 Leapin’ Lizard, SC-11 Blue Yonder, SC-15 Tuxedo, SC-83 Tip Taupe, SC-94 Curry Around, SC-97 Cant-elope, SP-254 Speckled Vanilla Dip, CG-718 Blue Caprice, S-2714 Herb Garden, SG-403 Red, SG-404 Blue, SG-410 Bright Blue, S-2101 Crystal Clear Brushing Glaze

Decorating Accessories

  • BT-910 Synthetic Sponge, CB-408 #8 Round, CB-604 #4 Soft Fan Brush, CB-308 Flat Round Shader, AC-213 Sponge on a Stick 1 ¼", AC-230 Clay Carbon Paper

Miscellaneous Accessories

  • Ball point pen, Pattern
  • Trio of Houses Stencil from Stencil Girl Products (L209) available here: http://www.stencilgirlproducts.com/Trio-of-Houses-Stencil-Carolyn-Dube-p/l249.htm

 

TrioOfHousesTray
Designer: Laura Fraedrich
 
 

Instructions

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using the CB-604 #4 Soft Fan Brush, apply 3 coats of SC-15 Tuxedo to the bottom and sides of the tray.
  3. Using the clay carbon paper and a ball point pen, transfer the pattern onto the tray.
  4. Using the CB-408 #8 Round brush, apply 3 coats each of the SC-7 Leapin’ Lizard, SC-11 Blue Yonder, SC-83 Tip Taupe, SC-94 Curry Around, SC-97 Cant-elope, and SP-254 Speckled Vanilla Dip according to the placement indicated on the pattern.
  5. Line up the Trio of Houses stencil so that the design overlaps the appropriate sections that were painted in step 4.
  6. Using the AC-213 Sponge on a Stick 1 ¼", apply 1 coat of SC-15 Tuxedo over the entire stencil. Use an up and down dabbing motion to apply the glaze. Remove the stencil.
  7. Using the Round brush, apply 1 coat of CG-718 Blue Caprice over the SC-11 Blue Yonder of the sky.
  8. Using the 8 Round brush, apply 1 coat of S-2714 Herb Garden over the SC- 7 Leapin’ Lizard of the grass
  9. Outline the windows with SG-404 Blue Designer Liner
  10. Squeeze out a small amount of SG-410 Bright Blue Designer Liner onto your palette. Use the CB-308 Flat Round Shader to apply one coat to the windows of the houses.
  11. Squeeze out a small amount of SG-410 Red Designer Liner onto your palette. Using the Flat Round Shader, apply one coat to the doors of the houses.
  12. Use the Round brush to apply one coat of S-2101 Crystal Clear Brushing Glaze over the doors and windows of the houses.
  13. Stilt and fire to shelf cone 06.

custom-css-security