Dragonfly Cobblestones

 

 
 
Products Used

Bisque
  • MB-882 Rectangle Tray
Color
  • FN-004 - Red
  • SC-6 - Sunkissed
  • SC-10 - Teal Next Time
  • SC-15 - Tuxedo
  • SC-16 - Cotton Tail
  • SC-26 - Green Thumb
  • SC-31 - The Blues
  • SC-71 - Purple-licious
  • SC-75 - Orange-A-Peel
  • SC-77 - Glo-Worm
  • SG-201 - Black Cobblestone
Decorating Accessories
  • AC-230 - Clay Carbon Paper
  • BT-910 - Synthetic Sponges
  • CB-110 - #10/0 Liner
  • CB-408 - #8 Pointed Round
  • CB-604 - #4 Soft Fan
mb882 dragonfly
 
 
Additional Materials
 
Project Info
 

Instructions

 

 

  1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
  2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-004 Red to the front and back of the plate. Allow to dry.
  3. When the plate is dry, using a pencil and AC-230 Clay Carbon Paper, trace on the pattern.
  4. Using a CB-408 #8 Pointed Round, load the brush with SC-26 Green Thumb and side load with SC- 10 Teal Next Time and SC-77 Glo-Worm. Starting at the bottom of the tray, pull upward to make the tall grass letting the brush roll from side to side.
  5. Using a CB-408 #8 Pointed Round, load the brush with SC-26 Green Thumb and side load with SC- 77 Glo-Worm.
  6. Using a CB-408 #8 Pointed Round, place puddles of the following colors on the wing with some of the colors on top of one another: SC-6 Sunkissed, SC-71 Purple-licious, SC-75 Orange-A-Peel, and SC-77 Glo-Worm. A hair dryer can be used to force dry the colors and develop cracks. This will allow the red glaze to show through.
  7. Using a CB-408 #8 Pointed Round, apply SC-31 The Blues or color of your choice to the dragonfly body.
  8. Using a CB-110 #10/0 Liner, outline the dragonfly and paint the eyes with SC-15 Tuxedo.
  9. Using a CB-604 #4 Soft Fan, apply 2 coats of SG-201 Black Cobblestone to the border of the plate. Allow to dry.
  10. Stilt and fire to shelf cone 05/06.

custom-css-security